Відео

Why does mine run like shit after the install?

Never press a ball joint in at home. Purchase a high quality steering knuckle & wheel hub bearing with the ball joint pressed in at the factory. It is too dangerous because if the ball joint comes apart at high speeds, it could kill you!!!!

How in the world do you pull the actual OEM bulb from the housing lol I can't be the only one stuck! Please help! 🙏

I found a 2009 Toyota Matrix fascia plate online that fits the HIKITY 9 inch head unit. It really makes the dashboard nice looking without the homemade look. I did buy flush-mount USB cable and cut a square hole for it. Both USB ports are easily accessible. Also, I installed a 3 pole On-Off-On switch, so I can flip on the reverse camera at any time needed.

Can you just do it to the driver side? I want to keep some oil going into the mix from the passenger if that makes sense

Yo I forgot to put in those little o rings… how fucked am I

Great Job great video clear pictures great narration .... however to save $280 at dealer you spent several hours and 50 bucks in fluid and then you need to dispose of used fluid for me the 280 would be money well spent lol..

Not hating , but it sounded noisy when you turned it on.

Anyone know if its same location for 2020 crv???

I ran into this problem, and idk if it happened to u, but the Z1 stainless y pipe my bung came off, and it sounds different now.

We just did the swap but the car won’t crank, we confirmed we have power to the switch on the pedal and have spliced into the proper wire along with confirming that the harness was all plugged in, any ideas?

did you put in 2 quarts

Can you add widgets and change the Home Screen?

What kind of jack you got? And where did you place it at. Maybe you can make a video for that. lol just saying

Thankyou!

how long should the 3/8 extension be to reach the plugs?

Hows your engine bay so clean? My civic also has 100 K miles and it's a mess.

Wanted to get a pair for my accord but everyone keeps telling me these are horrible quality and won’t last long

The copper seal can you use that for any straight pipe kit or ig what’s the requirements to use that

There is a specific tool you can use to remove the push pins and keep them intact.

Your videos are always so informative! I'm new to this and not mechanically inclined, so forgive the basic question, but if I get the race maf, I'd be getting it installed at a mechanic shop. Can I wait until I get it home to flash the tune? Like will it start and make it home? Or would I need to flash there.

Thank you! Very clear and nicely done. I see your headlights have a kind of black frame around, where you get those?

@2:08 what's that car in the background?

Thank you dude, awesome tutorial 👍

Glad you still have your car! Im on my third fk7

nice video but... why u did not install the roll vents.. ? looks ugly those holes under the vents...

I have a joying head unit I just bought and I’m currently having 2 issues, though considering I only just got it I might figure it out, but the blind-spot camera in the side-view mirror doesn’t seem to work, and I cannot change any of the car settings through the unit, any suggestions?

Does anyone know what gauge he used for the wire? Or what gauge is good to be used?

That's a great video thank you. I'm really curious if the evaporator is accessible easily once the blower motor and fan is removed. The issue I'm having is (after a lot of diagnostics) is with a leak in the evaporator and I'm not sure if in this model year or a GEN 4 CRV... if the evaporator is right there and accessible? If so this video is really making that job more realistic for me than removing the entire dash

I have similar issue on my Honda 2007 accord. i should try this tricks.

Is there any where to order just the blue plastic piece mine is missing

Does this work for the 2017 Honda civic lxp coupe?

I always just repump in the fluid enter the Overflow port until it starts flowing out. Never sure if it's supposed to be running or not. If it's running it will take in a half a quart more. Then when you turn off it will pour out. I have changed my 2017 several times since new. Just only never confirmed whether it should be running or off when waiting for the Overflow to drip out. Lots of opinions both ways. So I kind of just made it in the middle meet it in the middle

I'm seeing clean vehicle 'Heaven'. Very impressed with your equipment.

im going to do this myself wish me luck ! im using this video as reference for sure

Anyone try the 10.1 inch version of the joying head unit?

Always check the fill plug. It only takes a minute.

En donde se ubica en un 2006

Got a link to the kit? I can’t find it

Does this work for 2.0

😂

Z-speed, This made me laugh so much! Thanks for sharing!

love your channel bro its been helping a lot! just picked up a clean 05 V6.. these cars are timeless, I see them all over LA!

What year civic is this and what trim ? Also do you still have the dynamic guidelines when backing up ?

I don’t know if you still reply but i recently changed my camshaft sensor from autozone, but then still had a long crank 2-3 seconds, then replaced with oem but still same problem even having the ses light and slip light

Instead of pvc blaster could silicone spray work ?

I have a 2017 honda civic ex and bought the smaller Kicker subwoofers that you got when I first got my car. Honestly, they sounded tinny and bass wasn’t as even toned as oem no matter how I played with the settings. I got one more replacement after but I don’t remember which one, and it still sounded worse. I gave up and kept oem, sadly I’ll say I eventually got used to them. Also, I have to say that Crutchfield has awesome customer service.

Thank you super helpful! Got code P0345 for bank 2. Love your videos. Did my valve cover gaskets a while back and ur videos never miss helped me out so much!!!

Does this radio allow you to have a custom radio start up like on the stock radio and does it allow you to change the wallpaper on in the background of the apps

quick question my car is the same as yours a 2018 Honda civic si coupe and I wanted to get those rims or wheels but was wondering if I needed to get new tires to install them or could just use the stock Honda tires which are in very good condition.